Hy-Pro Reversing Pumps

$778.26

Available in a range of sizes

Quantity

Shipping calculated at checkout.

Features
Specifications
Documents
FAQs

The Hydraulic Reversing Pump is a reversing pumpset designed to interface a hydraulic steering system with electric or autopilot control, suited to work with Furuno's NavPilot autopilot series. It interacts with the autopilot's hydraulic steering system, controlling the rudder's speed to provide the best steering results. Its reversing gerotor gear pump and valves run smoothly with minimum noise and vibration, ensuring you of an incredibly quiet operation.

Features:

Easy installation
Works with the Furuno NavPilot autopilot series
Reversing gerotor gear pump and valves run smoothly with minimum noise and vibration
Capable of working with both balanced and unbalanced cylinders
Ball bearing shaft supports both ends of motor
Extended motor shafting eliminates pump/motor coupling

Part Numbers:

PR0612 HyPro 0.6 L/pm Hydraulic Reversing Pump 12VDC

PR1012 HyPro 1.0 L/pm Hydraulic Reversing Pump 12VDC

PR1024 HyPro 1.0 L/pm Hydraulic Reversing Pump 24 VDC

PR1512 HyPro 1.5 L/pm Hydraulic Reversing Pump 12 VDC

Voltage 12 / 24 VDC

		Typical amp-hour 5 bar at 25% duty		Max current Intermittent 55 bar
	Nominal L/min	12v	24v	12v	24v
PR+05	0.5	1.5	-	10.0
PR+06	0.6	0.9	-	9.0	-
PR+08	0.8	1.3	-	14.0	-
PR+10	1.0	2.2	1.0	19.0	9.0
PR+15	1.5	2.4	1.2	24.0	11.0
PR+20	2.0	2.5	1.3	25.0	12.0
PR+25	2.5	2.7	1.4	34.0	15.5

Ingress protection:	IP67
EMC Protection:	BS EN 60945:2002 (DC)
Ignition Protection:	BS EN 28846:1993
EN ISO 10592:	1995 (Small Craft - Hydraulic Steering Systems)
Ambient Operating Temperature:	-15 to +55 deg C
Max Pressure:	55 bar (intermittent operation)
Reservoir line:	2 bar Max
Ports:	G1/4 (BSPP) Parallel A = ram port B = ram port R = reservoir port
Rotation:	Red lead to - positive Pressure to A port Black lead to positive - Pressure to B port
Hoses:	Suitable for working pressure 55 bar
Minimum burst pressure:	100 bar
Fluid:	ISO VG10 to VG40 Hydraulic mineral fluid meeting ISO 6743-4 HV