PRO-NDC-1E
Regular price
$943.48
NMEA Multiplexer - 5 inputs and 2 ISO-Drive outputs, Ethernet and serial connections (replaces NDC-5)
Shipping calculated at checkout.
Intelligent Type Approved NMEA 0183 Multiplexer
The PRO-NDC-1E is more than just an NMEA 0183 Multiplexer. Rugged, Robust, Type Approved Multiplexer with powerful, advanced features enable baud rate adjustments, auto-switching and sentence level filtering
Managing and routing your NMEA 0183 data is straight forward, hassle free using the PRO-NDC-1E;
- Auto-switching between inputs to allow for a primary, secondary, tertiary priority input.
- Configurable baud rates to allow 38400 and 4800 baud devices to operate through the same multiplexer.
- Sentence filtering to block unwanted sentences from specific outputs helps to limit bandwidth consumption.
- Easy to configure using the web based UI, no need to manually enter and edit strings of text.
- RINA type approved device means the multiplexer is fit for leisure, commercial and class / type installations.
- Multiple LED’s allow for ‘quick glance’ diagnostics to ensure everything is operating correctly.
- NMEA 0183 data streaming over Ethernet enables connectivity to existing Ethernet devices and systems.
- 5 OPTO-Isolated NMEA 0183 inputs and 2 ISO-Drive NMEA 0183 outputs provide protection for all connected instruments.
FEATURES
- Dedicated bi-directional Serial port (fully isolated utilising ISO-Drive technology)
- Serial port can be used as additional input / output
- Ethernet port supports direct and network connection
- NMEA 0183 streaming via Ethernet
- Configurable input and output baud rates
- Allows Data combining and rate conversion
- 2 independent Autoswitch virtual inputs with priority
- Isolation to battery supply
- Diagnostic LED’s
- Optional DIN rail mount
- Type Approved
BENEFITS
- Quick and easy to install
- Configuration using standard web browser, no PC operating system compatibility issues
- Advanced features solve NMEA 0183 data routing problems
- Fully isolated with ISO-Drive technology for peace of mind
- Easy firmware updates make the device future-proof
| Power Supply | ||
| Input supply voltage | 9 to 35 V DC | |
| Input supply current | 150mA max @ 12V DC (all outputs @ full drive into 100 ohm loads) | |
| Input protection | Continuous reverse polarity, transient overvoltage and ESD protection | |
| Power indicator | LED, Blue – indicates unit is functioning correctly | |
| Input Supply connector | Pluggable 2-way screw terminal, 5.08mm pitch (12 to 30 AWG) | |
| NMEA 0183 Port – Listener & Talker | ||
| Number of Listener / Input Ports | 5 isolated NMEA 0183 Listeners | |
| Number of Talker / Output Ports | 2 isolated NMEA 0183 Talkers | |
| Compatibility | Fully NMEA 0183, RS422 & RS232 compatible. RS485 Listener compatible | |
| Speed / baud rate | 4800 to 38400 bps | |
| Talker Output Voltage Drive | >= 2.2V (differential) into 100 ohm | |
| Talker Output Current Drive | 20 mA maximum per output | |
| Talker Output Protection | Short circuit and ESD | |
| Talker Data Indicator | LED, Orange (Flashes with data rate) | |
| Listener Input Voltage Tolerance | -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second) | |
| Listener Input Protection | Current limited, overdrive protection to 40 VDC and ESD protection | |
| Listener Data Indicator | LED, Green (Flashes with data rate) | |
| Connectors | Pluggable 2/3 way screw terminals, 5.08mm pitch (12 to 30 AWG) | |
| Serial Port | ||
| Compatibility | RS422 & RS232 compatible. RS485 Listener compatible | |
| Speed / baud rate | 115200 bps | |
| Output voltage drive | >= 2.1V (differential) into 100 ohm | |
| Output current drive | 20 mA max | |
| Output protection | Short circuit and ESD | |
| Input voltage tolerance | -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second) | |
| Input protection | Current limited, overdrive protection to 40 VDC and ESD protection | |
| Data Indicators | LED’s: Green = Receive, Orange = Transmit | |
| Connectors | Pluggable 3-way screw terminals, 5.08mm pitch (12 to 30 AWG) | |
| Ethernet Port | ||
| Host interface | 10/100BaseT, automatic polarity detection | |
| Supported protocols | TCP/IP for configuration and firmware updating | |
| TCP/IP and UDP for NMEA 0183 comms | ||
| Connector | RJ45 | |
| Indicators | Green – Link, Yellow – 100 Mbps | |
| Isolation | ||
| NMEA 0183 Listener | Uses IsoDriveTM, Hi-Pot tested to 1000V | |
| NMEA 0183 Talker | Uses IsoDriveTM, Hi-Pot tested to 1000V | |
| Serial Port | Uses IsoDriveTM, Hi-Pot tested to 1000V | |
| Ethernet Port | 2kv for 60s | |
| Mechanical | ||
| Housing Material | 316 Stainless Steel | |
| Dimensions | 139mm (W) x 98mm (H) x 26mm (D) | |
| Weight | 360g | |
| Mounting | Bulkhead mount or DIN rail mount (DIN kit 1) | |
| Approvals and Certifications | ||
| EMC | IEC 60945:2002-08, DNVGL-CG-0339:2019 & IACS UR E10 Rev7 | |
| Compass Safe Distance | 300mm | |
| Type Approval Certificate | RINA | |
| Operating Temperature | -25 to +70°C | |
| Storage Temperature | -40 to +85°C | |
| Relative Humidity (RH) | 95% @ 55°C | |
| Environmental Protection | IP40 | |
| Guarantee | 3 years (5 Years if registered) | |
| NDC-4 Vs PRO-NDC-1E | ||||||||
| Feature | NDC-4 | PRO-NDC-1E | ||||||
| Inputs (inc. serial port) | 5 | 6 | ||||||
| Outputs (inc. serial port) | 2 | 3 | ||||||
| Dedicated serial port | – | Yes | ||||||
| Ethernet port | – | Yes | ||||||
| Config tool | Windows only | Any popular web browser on any OS | ||||||
| Basic data filtering | Yes | Yes | ||||||
| Advanced data routing | – | Yes | ||||||
| Safe USB connection while powered via a battery | – | Yes | ||||||
| Pluggable connectors (quicker and easier installation) | – | Yes | ||||||
| Weather sealed | IP66 | IP40 | ||||||
